Tool 126

sort: relevancea-zz-a

Nipper Tool

Code TOOL-101
This nipper tool is designed for cutting soft lines, such as Beadalon 49, Beadalon 19, Beadalon 7, SuppleMax, Binding Wire, Elasticity, Stretch Magic, Beadalon Bead Cord, and more. Angled blades shear your stringing materials without fraying and they'll leave a smooth, clean edge. This tool is not recommended for cutting hard wires such as Remembrance or other spring-tempered material.

Superior Beader's Tool Kit

Code TOOL-511
Nine superior precision-made beading tools are in this convenient leatherette zipper pouch. This is what you've been waiting for. Each tool is carefully chosen for use with your bead and jewelry designs. This thoughtfully assembled collection is perfect for beginning beaders or professional designers. Keep all your tools in one place with this handy kit. This tool kit includes: crimping pliers, a knot cutter, nylon jaw pliers, #5 knotting tweezers, a wire rounder, split ring tweezers, chain nose pliers, round nose pliers and a side cutter.

Beadalon Knotter Tool

Code TOOL-164
This amazing tool makes pearl knotting a snap. Produce a tight, consistent knot every time with the Beadalon knotter tool. It can be used in the left or right hand. You will never struggle with your knots again. Knotting between pearls ensures your beads won't rub up against each other and if the strand breaks, your beads won't go flying, so this tool is invaluable. Creating a professional look in your jewelry designs has never been easier than with this tool.
Related Products Beading Tools

Cobra Coiler Wire Tool

Code TOOL-0215
Coil wires with ease using the Cobra Coiler wire tool. This tool comes with a mountable coiler, two mandrels that are 1/8-inch and 1/16-inch in diameter, instructions for use and a carrying case. With this tool, you can make coiled beads, beaded coils and everything in between. All you have to do is secure the Cobra Coiler to your work table, insert and tighten your desired mandrel, slide the wire into one of the slots, hold the wire with one hand and wind the crank with the other. You can also use other mandrels with this tool, from mandrels as thin as a pin to mandrels slightly thicker than 1/4-inch in diameter. Note: For a limited time, the Cobra Coiler will include an extra mandrel. This mandrel is shaped like a triangle, so you can make fun and interesting shapes within your jewelry. This extra mandrel is included with the Cobra Coiler only while supplies last, so make sure to get yours today.

Bead Crimper Tool

Code TOOL-100
Designed for crimping beads, these crimp pliers help give your jewelry a professional looking finish. The lower section crimps and the upper section rounds off your crimped bead for a clean, professional look. If desired, the finished crimp can be hidden in a large-holed bead or a crimp cover. The bead crimper tool works great with our 2mm x 2mm sterling silver crimp tubes and beads.

Four-In-One Multi-Task Tool

Code TOOL-121
These four-in-one multi-task pliers are a must for beaders and wire wrappers. They offer a finely tapered nose for coiling, a flat jaw for flattening, straightening, or bending, a groove for closing coils or jump rings, and a sidecutter. With PVC grips and double-leaf springs, these pliers are great for travel. Their total length is five inches (12.5cm).

Beader's Mini Tool Travel Kit

Code TOOL-618
Design jewelry on the go with this useful beader's mini tool travel kit. This helpful kit contains all of the tools you need to create stunning jewelry wherever you are and includes the following: round nose pliers, a semi-flush side cutter, chain nose pliers with cutter, a mini bead board, a thread cutter, and #5 knotting tweezers. All of these tools fit conveniently into a travel-sized box so you can easily pack them to bring with you anywhere.

Beadalon Knot-A-Bead Tabletop Knotter Tool

Code TOOL-0189
It's easy to knot between beads with the Beadalon Knot-A-Bead tabletop knotter tool. This ergonomically designed tool allows for two-handed knotting. The large opening can accommodate any shape of bead up to 16mm in diameter. This tool is great for knotting between pearls, as it offers consistent knot placement. Use this tool with braided cords, cotton, leather, silk, satin cord and more. Directions for using this tool are included on the back of the packaging.

The Beadsmith Zebra Tool Kit

Code TOOL-0268
You'll always know which tools are yours with this kit from The Beadsmith. This kit comes in a pouch that displays a fun zebra print pattern and all the tools inside feature the same pattern on their handles. The set includes a side cutter, round nose pliers, chain nose pliers, a bead reamer with three different tips that can be stored inside the hollow handle, flat nose pliers, and knotting tweezers. Even the tweezers display the black and white stripes! All of the pliers feature slip-resistant matte finish grips, a polished steel head, double-leaf spring for comfort, and boxjoint construction. You'll love working with these tools, whether you are a beginner or an experienced beader.

The BeadSmith Pick-It-Up Vacuum Tool

Code TOOL-0052
Finish projects that incorporate tiny components faster than ever with the Pick-it-Up vacuum tool from The Beadsmith. This tool uses suction pressure to pick up small components such as Flatbacks and Chatons and accurately place them where you want in your designs. You no longer have to struggle with tweezers or wax tips. This tool works quickly to put your components in place, all while avoiding finger print marks on your designs and strain on your hands. This tool even comes with a rubber tip that is perfect for picking up larger components. The power control wheel adjusts suction for different sized items. With this vacuum tool, you can finish those intricate projects filled with small items in half the time.

Dazzle-It Grey Leatherette Tool Wallet

Code TOOL-0191
Store your tools like a pro with the Dazzle-It grey leatherette tool wallet. This grey leather carrying case for your tools opens like a wallet and features bands that will hold jewelry-making tools in place. It is a great option for taking your tools with you when you're traveling. Let this tool wallet help you organize your tools and be ready for beading everywhere you go.

Beadalon Bangle Bracelet Weaver Tool

Code TOOL-0217
Create amazing bracelet designs with help from the Beadalon bangle bracelet weaver tool. This award-winning tool was designed by international designer, teacher and presenter Kleshna in collaboration with international craft wire specialists. It will help you create woven wire bracelets with ease. Use a variety of bead stringing wires in diameters 0.15 inches (0.38mm or 26 gauge) through .036 inches (0.91mm or 19 gauge). You can use the Beadalon Spool Tamer for each spool of wire to be used on the bangle. These measurements give the approximate width and size of Bangle Bracelets made with Beadalon bead stringing wires: .024 in (0.61mm) 49, 19 or 7 strand Beadalon wire 3.1 meters (10 ft) will make an approximately 17mm (0.67 in) wide Bangle Bracelet; .018 in (0.45mm) 49, 19 or 7 strand Beadalon wire 3.1meters (10 ft) will make an approximately 11mm (0.43 in) wide Bangle Bracelet; .015 in (0.38mm) 49, 19 or 7 strand Beadalon wire 3.1 meters (10 ft) will make an approximately 9mm (0.35 in) wide Bangle Bracelet. These widths may vary depending on how tight or loose the weft is done. Adding beads to the weft will change these widths.

The BeadSmith EZ-Rivet Piercing and Setting Tool

Code TOOL-0076
Pierce metal and set rivets easily with the EZ-Rivet piercing and setting tool from The Beadsmith. Not only does this tool pierce metal, it also sets semi-tubular rivets and eyelets. The domed base allows for use with rings and other curved items, allowing you to use this tool in a wide variety of projects. This tool is easy to use and will give your designs professional accents. This piercing and setting tool can be used with metal sheet up to 18 gauge.

Artistic Wire 3 Roller Wire Straightener Tool

Code TOOL-0164
Make sure your wire is always ready for use with the Artistic Wire 3 roller wire straightener tool. This tool features three rollers that work together to give you straight wire every time. The rollers fold closed around your wire and you pull it through to straighten it. It's the easiest way to prepare your wire for designs. You'll love how fast and easy it is to use this tool. Instructions for use are included.

Crystal Katana Rhinestone-Crystal Pick Up Tool

Code TOOL-0070
With the Crystal Katana rhinestone pick up tool, you can quickly and easily glue and place Flatback crystals. It includes an adapter for tiny SS9 to SS5 Flatback rhinestones. Made of premium jeweler's wax, the tip can be easily reshaped or rejuvenated. Award-winning designer Kelly DeFries of Crystal Ninja developed this essential Flatbacking tool. Why use anything else?

Precious Metal Clay Tool Kit (PMC)

Code TOOL-0140
Get started creating amazing metal clay jewelry with the help of this Precious Metal Clay Tool Kit (PMC). This kit includes everything you need to begin working with the innovative Precious Metal Clay. The tools each have their own pouch in the pack, keeping them separate from other tools. This kit includes a retractable scalpel, a #6 soft taper-point chisel shaper, a polyblade, a brass brush, a PVC Cool Roller and size-4 spacers, a 2-1/2 inch bent burnisher, a shrinkage ruler, a paint/slip brush, and an awl. The roll-up pouch makes taking these tools with you a breeze.

Dazzle-It Classic Slim Tool Set with Grey Handles

Code TOOL-0190
Be prepared for your jewelry-making projects with the Dazzle-It classic slim tool set with grey handles. These tools feature thin and durable rubber grips, great for beaders with small hands. The set includes a side cutter for cutting wire, bent nose pliers for attaching jump rings and findings to designs, round nose pliers for shaping wire into loops and slim flat nose pliers for securing your components. With this tool set, you can easily create amazing jewelry.

Beadalon Ring Weaving Tool by Kleshna Handel - S,M,L,XL

Code TOOL-0288
You can create custom ring designs with the Beadalon ring weaving tool. This tool works like the Beadalon bangle bracelet weaver tool. It will help you create rings in four approximate sizes: 4, 6, 9, and 11. Use Artbeads Designer Wire, Artistic Wire, Beadalon Bead Stringing Wire, and other flexible stringing materials to weave unique ring designs. This tool was designed by international designer, teacher, and presenter Kleshna. Instructions for use are included.

Embroidery Stitching Tool Needle Threader (Pack of 2)

Code SUP-0136
Add beads to your knitted projects with the embroidery stitching tool needle threader. Use it with an embroidery stitching tool or use it to string beads on crochet thread or yarn for knitting or use with the French Knitter. Load the beads on the threader, pull your yarn through the eye, and push the beads onto the yarn in batches. Let the beady knitting begin.
sort: relevancea-zz-a
This site protected by Trustwave's Trusted Commerce program